X

Guides

PC-configurator
Register Login
 EN   DA
  1. Front page
  2. Components
  3. Controller Cards
  4. Storage Adapters

StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe - Two Slot PCI Express M.2 RAID Card plus Two SATA Ports (PEXM2SAT3422) Styreenhed til lagring (RAID)

StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe - Two Slot PCI Express M.2 RAID Card plus Two SATA Ports (PEXM2SAT3422) - Styreenhed til lagring (RAID) - M.2 - M.2 Card / SATA 6Gb/s - RAID RAID 0, 1, 10, JBOD - PCIe 2.0 x2 - for P/N: BNDTB10GI, BNDTB210GSFP, BNDTB310GNDP, BNDTB410GSFP, BNDTB4M2E1, BNDTBUSB3142
829,00DKK663,20DKK excl. VAT

  • Product no 990334300

    Model PEXM2SAT3422

    Brand StarTech.com

    EAN 0065030863766

    Weight 0.18 kg

  • Product information and specifications are guiding only. Without notice, these can be subject to change by the manufacturer. This applies for product images as well.
Produktbeskrivelse StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe - Two Slot PCI Express M.2 RAID Card plus Two SATA Ports (PEXM2SAT3422) - styreenhed til lagring (RAID) - M.2 Card / SATA 6Gb/s - PCIe 2.0 x2
Enhedstype Styreenhed til lagring (RAID) - indstikskort
Bustype PCIe 2.0 x2
Harddiskens formfaktorkompatibilitet M.2
Interface M.2 Card / SATA 6Gb/s
Dataoverførselshastighed 6 Gbit/s
Understøttede enheder Diskarray (RAID)
RAID-niveau RAID 0, RAID 1, RAID 10, JBOD
Dimensioner (B x D x H) 2 cm x 18 cm x 12 cm
Vægt 100 g
Producentgaranti 2 års garanti
Designet for P/N: BNDTB10GI, BNDTB1394B3, BNDTB210GSFP, BNDTB310GNDP, BNDTB410GSFP, BNDTB4M2E1, BNDTBUSB3142, TB31PCIEX16
General
Device Type Storage controller (RAID) - plug-in card
Hard Drive Form Factor Compatibility M.2
Host Bus PCIe 2.0 x2
Storage Controller
Data Transfer Rate 6 Gbit/s
Interface M.2 Card / SATA 6Gb/s
Processor Marvell 88SE9230
RAID Level RAID 0, RAID 1, RAID 10, JBOD
Supported Devices Disk array (RAID)
Expansion / Connectivity
Interfaces 2 x M.2 Card - M.2 Card (internal)
Miscellaneous
Compliant Standards FCC, RoHS
Features Support port multiplier
Included Accessories Low-profile bracket, 2 x M.2 mounting screws
Manufacturer Warranty
Service & Support Limited warranty - 2 years
Dimensions & Weight
Depth 18 cm
Height 12 cm
Weight 100 g
Width 2 cm
Environmental Parameters
Humidity Range Operating 20 - 80% (non-condensing)
Max Operating Temperature 50 °C
Min Operating Temperature 5 °C
Compatibility Information
Designed For P/N: BNDTB10GI, BNDTB1394B3, BNDTB210GSFP, BNDTB310GNDP, BNDTB410GSFP, BNDTB4M2E1, BNDTBUSB3142, TB31PCIEX16

Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCI Express

  • Recover data or improve the performance and storage capacity of your desktop, by adding two M.2 solid-state drives (SSD) plus two SATA III drives
  • Create a high-performance hardware RAID array to protect and back up your data or expand your storage — supports RAID 0, 1, 10 (1+0)
  • Wide installation compatibility, with support for virtually all M.2 NGFF drives (22110, 2280, 2260, 2242, 2230), as well as hybrid drives
  • Port multiplier lets you connect up to seven drives total, including two M.2 drives
  • Two M.2 B-Key onboard sockets that support SATA III transfer speeds up to 6Gbps
  • Adjustable stand-offs, and multiple mounting holes support 110 mm, 80 mm, 60 mm, 42 mm, and 30 mm SSDs
  • Fast, hassle-free setup with native support on most operating systems
  • Compliant with PCI Express 2.0 standards
  • Supports Native Command Queuing (NCQ), as well as ATA and ATAPI commands
  • PCIe bus-powered, or powered by your computer’s power supply using a 4-pin floppy power connector (small drive power)
  • Equipped with a full-profile bracket, includes a low-profile (half-height bracket) for installation in small form-factor computers
  • Installs into x4, x8, or x16 PCIe slots
Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCI Express
slide {0} of {1}, zoom in, Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCI Express
slide {0} of {1}, zoom in, Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCI Express
slide {0} of {1}, zoom in, Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCI Express
slide {0} of {1}, zoom in, Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCI Express
slide {0} of {1}, zoom in, Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCI Express
slide {0} of {1}, zoom in, Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCI Express
Leverage the size and speed of M.2 drives

Leverage the size and speed of M.2 drives

This M.2 controller card lets you take advantage of the size and performance benefits of NGFF SSDs. M.2 drives are smaller than typical platter drives or mSATA-based SSDs, so you can install them in small form-factor PCs and servers, or in tighter areas within your computer case.

When you couple the card with an M.2 drive, you can give your computer’s performance a noticeable speed boost. By installing your operating system on the M.2 drive, you'll have faster access to the files you commonly use, and you can continue to use your higher-capacity platter HDD for bulk storage.
Peace of mind, with simple and cost-effective data recovery

Peace of mind, with simple and cost-effective data recovery

Due to their performance and size advantages, M.2 drives are commonly used in laptops. If your laptop has failed but its M.2 drive is functional, then this card can help with data recovery. Once the M.2 drive is installed and the data recovery is complete, you can continue to use the drive for storage and backup purposes.
Build a high-performance RAID array

Build a high-performance RAID array

If you need a scalable, internal storage solution that you can count on, then this card can help. It supports a range of RAID configurations (RAID 0, 1, and 10), giving you multiple ways to expand your storage, improve your computer’s performance, or to create data redundancy backups.
Connect even more drives with port multiplication

Connect even more drives with port multiplication

Because the M.2 card supports port multiplication, you can connect up to four drives to one of the card’s SATA ports. With a built-in port multiplier, you can install up to seven drives (two M.2 SSDs, five SATA drives) in your computer through this single drive controller.
Supports a wide range of drives

Supports a wide range of drives

You can rest assured that your M.2 SATA drives are compatible with the card. It supports the most common drive sizes, including 22110, 2280, 2260, 2242 and 2230. For more versatility, the card also supports hybrid drives.

The PEXM2SAT3422 is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCI Express

Applications

  • Increase the internal storage capacity of your standard or small form-factor computer
  • Create a RAID array and add the security of data redundancy and increased storage to your PC
  • Access and recover data from almost any M.2 SSD, such as drives pulled from laptops and other computers
  • Optimize your system for I/O intensive applications such as office suites, photo and video editing, and media players
Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCI Express

open a new tab with document
open a new tab with document